|
Santoprene®
Tubing
Santoprene®
Sheets
Santoprene®
Rods
Other
Sheets Rods and Tubes
Tygon Tubing
UHMWPE
Tapes
Hoses
Domestic
Selling Policy
Privacy
Contact
Square
Watermelon Growing Cases
Felt Strips, Discs,
Sheets
Sheet
Metal Screws
Tapping
Screws
Goods and services provided by
K-mac Plastics (MI, USA).
Sold by 2CheckOut.com Inc. (Ohio, USA).
| |
Zinc Plate Mechanical Properties
| Hardness, Brinell |
163 |
163 |
|
| Hardness, Knoop |
184 |
184 |
Converted
from Brinell hardness. |
| Hardness, Rockwell
B |
84 |
84 |
Converted
from Brinell hardness. |
| Hardness, Vickers |
170 |
170 |
Converted
from Brinell hardness. |
| Tensile Strength,
Ultimate |
540 MPa |
78300 psi |
|
| Tensile Strength,
Yield |
415 MPa |
60200 psi |
|
| Elongation at
Break |
10 % |
10 % |
|
| Reduction of Area |
35 % |
35 % |
|
| Modulus of
Elasticity |
200 GPa |
29000 ksi |
Typical
for steel |
| Bulk Modulus |
140 GPa |
20300 ksi |
Typical
for steel. |
| Poisson's Ratio |
0.29 |
0.29 |
Typical
For Steel |
| Machinability |
160 % |
160 % |
Based
on 100% machinability for AISI 1212 steel. |
| Shear Modulus |
80 GPa |
11600 ksi |
Typical
for steel. |
Electrical Properties |
|
|
| Electrical
Resistivity |
1.74e-005 ohm-cm |
1.74e-005 ohm-cm |
Typical
steel |
Thermal Properties |
|
|
| CTE, linear 20°C |
11.5 µm/m-°C |
6.39 µin/in-°F |
Typical
steel |
| CTE, linear 250°C |
12.2 µm/m-°C |
6.78 µin/in-°F |
Typical
for steel ; 0-300°C (68-570°F) |
| CTE, linear 500°C |
13.9 µm/m-°C |
7.72 µin/in-°F |
Typical
for steel ; 0-500°C (68-930°F) |
| CTE, linear 1000°C |
14.7 µm/m-°C |
8.17 µin/in-°F |
Typical
steel |
| Specific Heat
Capacity |
0.472 J/g-°C |
0.113 BTU/lb-°F |
Typical
steel |
| Thermal
Conductivity |
51.9 W/m-K |
360 BTU-in/hr-ft²-°F |
Typical
steel |
| |
Threaded Rods
Springs
Carriage
Bolts
Dowel Pins
Lag Screws
Self
Drilling Screws
Wood Screws
Spring Pins
Eyebolts
Taper Pins
Set Screws
Drill Bits
Machine
Screws
|
